Current page :

Home

/

Waste Water

/

Blower and Aerator

/

Roots Blower

Roots Blower

Description: Roots Blower

Three-Lobe Roots Blower

 

GRB three-lobe Roots blower

 

GRB is a displacement blower, the pressure can be adjusted according to the requirement of the user in allowing range, there are two impellers in the blower body which rotate in the opposite direction, in order to let the impeller rotate, there are some tiny gap between the impeller to body impeller to impeller. When the impeller rotates through the suction inlet, it can gather an amount of air between the body and impeller, then the impeller go on rotating, and the air will be pressured, the pressure in the body will rise, finally the air has been send to the outlet.
 

Capacity:  0.18m3/h-165m3/h    

Pressure: 1000mmAq-8000mmAq    

Outlet:      40mm-300mm

 

Application:

Waste water treatment Dust collecting after burning; 
Equipment of dust collection; 
Vacuum dehydration for dying, paper industry;
Ventilation, desolates, Environment caring;
Exhausting and drying, Air transportation; 
Gas, bulk conveyance, Aquarium;
Conveyance by air, Liquid agitation;

 
Features
Wide range of capacity and pressure.
Calibre:      32mm-400mm (1.25 "-16")
Capacity:   0.38-283m3 /min (13-9985CFM)
Pressure:  The pressure of one-stage GRB type up to 8000mmAq (0.8kgf/cm2 )
Delivers completely oil-free air.
Low oscillation and low noise by dynamic balance which revised by computer.
Smaller change in capacity against change in pressure.
High effificiency due to special impeller design, great air-delivery low power.
Simpler and solider structure, less trouble.
Highest quality pilot & accurate great applied, long life
and low noise assured.
Standardized product with strict quality control.
Our rotor has used the most advanced technic, one time for all working process of the six shaft method, to enhance the precision.
 

 

 

LRB low pressure three-lobe roots blower

 

LRB is a displacement blower, the pressure can be adjusted according to the requirement of the user in allowing range. There are two impellers in the blower body which rotate in the opposite direction, in order to let the impeller rotate, there are some tiny gaps between the impeller to body, impeller to impeller. When the impeller rotates through the suction inlet, it can gather an amount of air between the body and impeller, then the impeller go on rotating, and the air will be pressured, the pressure in the body will rise, finally the air has been sent to the outlet.

 

Capacity:   0.82m3/h-127m3/h                   

Pressure:  6000mmAq                         
Outlet:       50mm-300mm   

 

Application:

Water treatment;

Brewery and beverage industry;

Fishery;

Incinerator;

Fermenting plant;

Car washing;

Paper mill;

Pipe clearing;

Electroplate factory;

Sauna;

Conveying

 

Features
Wide range of capacity and pressure.
Calibre: 50mm-300mm (2"-12")
Capacity: 0.63-121m3 /min (22-4236CFM)
Pressure: The pressure up to 6000mmAq (0.6kgf/cm2 )
Delivers completely oil-free air.
Low oscillation and low noise by dynamic balance which revised by computer.
Smaller change in capacity against change in pressure.
High effificiency due to special impeller design, great air delivery low power.
Simpler and solider structure, less trouble.
Highest quality pilot & accurate great applied, long life and low noise assured.
Standardized product with strict quality control.
Our impeller has used the most advanced technic, one time for all working process of the six-shaft method, to enhance the precision of leave wheel.

 

 

Product Show

 

 

Packaging & Shipping

_20240325180432

Inquiry Now

Product Name:Roots Blower

Hot products

Top footer
Contact usClose

Company: Tianjin Justin Technology Co.,Ltd

Contact: Justin

Tel: +86 13312099288

Phone: +86 13312099288

E-mail: info@justintec.cn

Address: Qudian Industrial Zone, Beichen District, Tianjin City, China

Scan the qr code关闭
Qr code