hyperboloid mixer can provide optimal solution for mixing and agitating where the solid, liquid and gas need interflowing,like precipitation tank, equalization tank, anaerobic tank, nitration tank,and denitrifying tank.It is widely applied in wastewater treatment, chemistry, energy and light industry.
Working Conditions
• The temperature of the liquid is generally 0-42°C;
• The PH range: 5-9;
• The density of the liquid does not exceed 1150kg/m3;
• The maximum working depth generally does not exceed 10 meter;
• The minimum working depth is not less than 0.9 meter;
• Interval start time is not less than 10min.
Main Features
• Compared with traditional paddle mixing, Hyperboloid mixer is more uniform mixing, with feature of high efficiency, low energy consumption and no dead angle.
• Simple structure, easy to install and maintain.
• Used for various water treatment processes, more superior mixing effect.
• Large specific surface area impeller with small motor, more energy saving.
Structure
Hyperboloid mixer is composed of a geared motor, a shock absorber, a shaft, a hyperboloid impeller, and a bridge with support pillars(supplied by buyer). QSM Hyperboloid mixer can hold a large capacity flow, get a big area circulating and gradual water flow. The unique impeller design perfectly combines the fluid features and mechanical movement to the maximum degree. The curved surface is shaped by the curve of formula xy=b, rotating around y axis, in order to cater to the water flowing, the impeller is designed to feed water from the center, on one hand, the turbulent flow is reduced, on the other hand, the pressure of the liquid on the impeller surface is equal and even, therefore the machine will be balanceable in the movement status. Eight guide vanes are equally distributed on the involute dual cambered surface. The kinetic energy is created with help of the potential energy from the supplementary water fed by the deadweight pressure of the fluid and the centrifugal force by the impeller rotating, the fluid will move along the tangent of the impeller circumference under the condition of acceleration of gravity, with reflection of the pond wall, a circulating water flow is
formed from bottom to top, therefore the cross-water flow is formed in the direction of axial Y and radial X. The structure features and special installation mode (in the bottom of the pond) of the hyperboloid mixer impeller decide the ideal mixing effectiveness, and effectively avoids mixing dead zones.
Justin
Justin
Justin